Energy Suspension Front Control Arm Bush Kit For Mazda MX-5 NA NB

From: £119.68

Energy Suspension Front Control Arm Bush Kit For Mazda MX-5 NA NB

Rubber softens over time, reducing its ability to hold your suspension components firmly in place. This means that when your wheels hit the road, the once meticulously aligned suspension is able to flex, moving your geometry along with it. By replacing your tired rubber bushes with uprated polyurethane, your suspension keeps its alignment better, making your car handle more positively and predictably.

Moreover, the design of these bushings is more akin to a bearing, allowing the arm to move freely up and down while being solidly located within the arm. This allows the suspension to do its job rather than the control arm bush acting as a damper in motion. Highly recommended by BOFI Racing to ensure predictable, repeatable handling characteristics, giving you an even better feel in the hand than when the car was new.

Kit contents

  • 2 x 2165 Upper Control Arm Bushings
  • 2 x Center Metal Sleeves for 2165
  • 2 x 2690 Lower Control Arm Bushing Halves (Front Position)
  • 2 x 2691 Lower Control Arm Bushings Halves (Front Position)
  • 2 x Center Metal Sleeves for 2690, 2691
  • 2 x 2692 Lower Control Arm Bushing Halves (Rear Position)
  • 2 x 2693 Lower Control Arm Bushing Halves (Rear Position)
  • 2 x Center Metal Sleeves for 2692, 2693
  • Formula 5 Prelube Tubs
  • 1 x installation Instructions # 17491

Additional information

Shipping Weight 2 kg
Shipping Dimensions 25 × 13 × 9 cm

Energy Suspension




, ,


Mk1 (89-98), Mk2 (98-05)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.

Make Model Year
Mazda MX-5 I (NA) 1989 - 1998
Mazda MX-5 II (NB) 1998 - 2005