Adjustable front lower control arms make drifts more predictable and controllable. Destroy or Die have designed these lower control arms to be the ultimate solution for NC drift cars. Camber adjustment is provided separately at the ball joint in addition to the factory bolts, increasing camber further and allowing for the fine adjustment of your alignment settings.
The lower control arms are designed to have massive wheel clearance for extreme steering angles, enabling you to drift and previously unreachable angles. No trimming of the chassis or bodywork is required, allowing arms to be fitted easily and reversed at a later date if necessary. OEM bushes are utilised, allowing you to upgrade or replace them as required easily. Bushes are not included.
The Destroy or Die knuckle for the NC goes one step further to provide a second pickup point for the track rod end. This provides ideal steering geometry for grip driving whilst retaining 40mm of roll centre correction. The super knuckle and lower control arm kit utilises the NA NB lower ball joint.
Recommended parts
We recommend Energy Suspension bushes. Tried and tested on our own cars and used by AWR for their engine mounts, they’re high-performance bushes that are cost-effective compared to Powerflex. The Borg and Beck ball joint includes all the hardware necessary to mount them into this kit. Extended inner tie rods are required when extending the track width on the NC.
Features:?
- Fit all NC models – direct bolt-on
- Camber adjustment is separate from factory bolts allowing optimum caster and camber settings
- Massive wheel clearance for increased steering angle
- No trimming of chassis or bodywork required
- Use OEM applicable bushes
- 40mm of roll centre correction
- Drift setting
- Grip setting
- ABS compatible
Contents:?
- 2x Front Lower Control Arms
- 2x Front Super Knuckles
Warnings:?
- Bushes sold separately
- Fitting by an experienced mechanic is strongly recommended.?We are not responsible for any damage caused due to incorrect fitting or assembly
- Widens track by?at least 25mm per side, 100 total maximum
- Not for road use