The CANchecked MFD32S Multi-Function Gauge is a great gauge for Mazda MX-5 NA and NBs. Whether on the 1/4 mile, circuit, race track or on the street, having a quick and obvious indication to change gear ensures you’ll be getting the best out of our car. The gear shift indicator lights up in ascending colours and signals the optimal shift time, without having to look directly at it. The colour sequence can also be adjusted according to individual tastes.
The display shows up to 64 values and is suitable for all freely programmable control units with CAN bus and many with serial interface. In addition, it has an 8GB SD card for logging while driving. All of the 10 display pages can be customized by the customer with widgets.
Key Features:
– 3.2 inch capacitive touch display
– Shift light function included
– 8GB SD Card Memory
– 1x PWM output
– 1x digital output
– Data logging
– CAN Bus switching
– Up to 10 freely configurable display pages
– Connection via CAN bus and serial interface
– 4 analog inputs for 0 – 5V sensors (for example oil pressure, fuel pressure, exhaust temperature (with adapter) and boost pressure)
– Shift Light (optional)
– Performance Meter (measures for example the time from 100-200 km/h)
– Individual minimum and maximum warning values
– Popup function when values exceed or fall below
– Screen brightness adjustable
Views:
– 10 pages to configure freely- Up to 17 widgets per page
– 10 different widgets (digital number, bar, speed, single pointer, log, Tableswitch, picture (from SD card), number, circle display, Haldex) – Widgets via Drag’n’Drop movable and resizable
– Depending on the widgets color adjustment possible
As an alternative, the online configurator is available. Here, the views can be created in advance and then copied to the SD card via the export function.
logging:
There are four different logging types available:
1. USB: logs live all sensor data via USB hub
2. SD card: all sensor data is logged on the SD card
3. Debug: all CAN bus data is logged via USB.
4. sDbg: all Can Bus data is stored on the SD card (CAN Bus Logger)
To read the log, go to logviewer. Just load logfile and use the intuitive interface.
Supported ECUs:
In general, all ECUs are supported which have a documented CAN bus or a serial interface. The latter is only possible with optional serial adapters. Most manufacturers deliver a “dbc” file, which is then converted into a .tri file for the display. This can also be done by the customer himself via the DBC converter via the CANchecked manufacturer website.
Optional Accessories:
– EBC electronic boost controller
– Boost pressure sensor 4,5 Bar / 65 Psi
– Haldex license
– Serial adapter (VEMS + Ecumaster without CAN)
– Vehicle-specific integration
The following standalone engine units have already been implemented:
– trijekt (Premium, Bee, trigifant)
– AEM
– MaxxECU
– Ecumaster EMU standard and Black
– Megasquirt 2 und 3
– k-data KDFI
– UMC1/UMC2
– EFIgnition
– Microsquirt
– EcuMaster EMU (classic with Can-Bus adapter: EMU Black)
– AIM generic protocol
– LinkECU
– Haltech v2
– MME ECU481 with Can Bus
– SCS Delta GDI4 and Delta
– VAG (Audi / VW / Seat)
– Van kronenburg KMS MD35 (MP25 with CAN-Bus adapter)
– VEMS with serial adapter
If your ECU is not listed, please contact us
Haldex
The 3.2″ display has the ability to control the VAG 4Motion Haldex control unit (VAG Gen 1 PQ34 platform). The communication occurs via CAN bus, so no conversion of the Haldex is necessary. The controller is activated by a license.
scope of delivery
– CANchecked 3. 2 Inch Display with shift light
– Quickstart guide
– Connector A, connector B
– Pre-crimped cable
– Four mounting screws
– 8 GB Micro-SD Card (installed)
– MicroSD Adapter to SD
– Display film
– 2x 1K1 pullup resistor (for NTC)
– Additional Pins for self-crimping
Installation manuals can be found on CANchecked website
Dimensions
– Aperture 69 x 54 mm
– Cover 95 x 77 mm
– Depth 24 mm
The display is configured via the website or via the Display Setup Software (found on the CANchecked website under the menu item DSS). The dbc-converter for the Can Bus protocol and the online configurator for the widgets, whereby this can also be set via the touch display.
The temperature range of the display is -10?C to 70?C.
12V are required as a voltage supply, 5V or 24V are optional possible.