Eight Nine Intake Air Temperature Sensor For Standalone ECUs
The Intake Air Temperature Sensor For Standalone ECUs is required when fitting any aftermarket standalone plug and play ECU. Using a 2 pin connector, the body does not need to be earthed. The intake air temperature sensor does not have a polarity, making installation simple by cutting off the original sensor and adding the replacement EV1 connector. The connector disconnects from the sensor so that wiring does not become twisted during installation.
This allows you to delete the factory maf / mass air flow sensor or afm / air flow meter, Also known as an IAT sensor or AIT sensor.
T (Celcius) | T (Kelvin) | Predicted R (Ohms) | Predicted V (Volts) |
120 | 393.15 | 228 | 0.389 |
100 | 373.15 | 379 | 0.616 |
80 | 353.15 | 669 | 0.992 |
63 | 336.15 | 1142 | 1.486 |
50 | 323.15 | 1787 | 1.991 |
40 | 313.15 | 2585 | 2.446 |
32 | 305.15 | 3535 | 2.835 |
25 | 298.15 | 4714 | 3.179 |
20 | 293.15 | 5838 | 3.419 |
15 | 288.15 | 7284 | 3.648 |
10 | 283.15 | 9160 | 3.862 |
5 | 278.15 | 11614 | 4.057 |
0 | 273.15 | 14854 | 4.231 |
-8 | 265.15 | 22450 | 4.463 |
-20 | 253.15 | 43805 | 4.71 |
-40 | 233.15 | 155512 | 4.915 |
Features
- Number of Poles: 2
- Thread Size: M12 x 1.5
- Includes new EV1 pigtail connector kit