AWR Polyurethane Engine Mounts for Mazda MX-5 NA NB 94-00 1.8
The factory engine mounts on the Mazda MX-5 NA NB are known to be fragile and often break prematurely. AWR have produced an engine mount that is a direct bolt-on replacement for the NA NB 94-00 1.8. The mounts bolt directly into the factory location and provide substantially more engine support thanks to the included Energy Suspension polyurethane bushes. AWR are so confident that these mounts are up to the task that they come with a limited lifetime warranty*.
The increased strength of the AWR mounts significantly improves the shifting feel, transforming how the car puts power down at the rear wheels. Drivetrain lash is virtually eliminated when transitioning on and off the throttle, preventing miss-shifts and increasing throttle response. AWR engine mounts are available in a wide range of durometers from daily driver to track weapon, providing options for all types of drivers.
Which durometer is best for you?
62 – 70 durometer is recommended for daily driving with little to no mods
70 – 88 durometer is recommended for lightly to intermediate modification levels
88 – 95 durometer is recommended for highly modified street and track builds
You can always opt for a different durometer if your first choice doesn’t suit your needs, the bushes are easy to remove and replace
Initial NVH (noise, vibration, harness) will begin to settle after around 500 miles
Kit includes
- NA NB 94-00 1.8 MX5 complete mount kit
- Mounting hardware
*Warranty applies to steel fabricated parts. AWR reserves the right to fix or replace at their discretion. Bushes are a wear item and not covered under warranty.
Warranty information
Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.
Making a warranty claim
Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.