The Fine Cut V3 Black Short Shifter is designed specifically for Mazda MX-5 NA NB 5 Speed. Renowned among MX-5 enthusiasts for its exceptional feel, this handmade shifter boasts a machined aluminium shaft and stainless steel base, ensuring durability and comfort. Choose from three distinct designs: straight & long, straight & short, or angled, which can be effortlessly adjusted to suit your preference. The Delrin gear knob withstands extreme temperatures, guaranteeing year-round comfort. Standing at 320mm tall, this shifter elevates the knob closer to the steering wheel, facilitating smoother gear changes with its shortened throw. Manufactured in Europe, it’s a perfect upgrade for any MX-5 enthusiast seeking enhanced performance and style.
Height
Measured from the top of the gearbox mount to the top of the gear knob, these are the heights for each shifter
- V1 Straight & Low – 275mm
- V2 Straight & Long – 315mm
- V3 Angled – 320mm
Which gearbox do I have?
The most foolproof way of knowing this is to remove your current shifter and measure the size of the bush at the bottom of your shifter. The measurements for these are below.
89-05 5 Speed & 98-01 Early 6 Speed: 15mm Internal Diameter / 19mm External Diameter
02-05 6 Speed: 18mm Internal Diameter / 21mm External Diameter
Features
- 315mm tall from the mount to the top of the knob
- Delrin gear shift knob
- Significantly shorter throw
- Handmade in Europe
Warranty information
Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.
Making a warranty claim
Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.
