These rear knuckles by Destroy or Die are designed to correct the roll centre by 30mm. This reduces helps to lower the centre of gravity without increasing camber, greatly improving the suspension dynamics and reducing tyre wear. The super knuckles provide a second set of caliper mounting points to add a second caliper for a hydraulic handbrake so that it doesn’t pump the brake pedal when pulled.
Engineered to use OEM wheel bearings, these Super Knuckles are an excellent upgrade for your MX-5. OEM bushes are utilised, allowing you to easily upgrade or replace them as required. Bushes are not included with the Super Knuckes but are included with the Destroy or Die rear upper camber arms.
Features
- Fit all NA & NB models – direct bolt-on
- 30mm Roll Centre Correction lowers the centre of gravity along with the roll centre without increasing camber giving superb active suspension dynamics and more even tyre wear
- Dual calliper mounting points?for additional stand-alone handbrake
- No abs mounting holes
- Powdercoated black
Contents
- 2x Rear Superknuckles (LH&RH)
Warnings
- We recommend a minimum rear wheel size of 15x8j et0. Wider/smaller wheels will require spacers or more negative offset for clearance on the inner lip. This is a guide only and may vary depending on the wheel design/manufacturer.
- We recommend installing new wheel bearings as?old ones will always fall apart during removal
- Fitting by an experienced mechanic?strongly recommended.?Destroy Or Die are not responsible for any?damage caused due to incorrect fitting or assembly.
- Coilovers without separate height & preload adjustment may rub on the driveshaft depending on vehicle ride height. We recommend BC Racing, MeisterR, HSD or other more adjustable coilovers.
- Not for road use