Hel Performance Hydraulic Handbrake Lines for Mazda MX-5 NA NB

£68.47 inc. VAT

Available to order — 9 due on 28/05/2024

Hel Performance braided brake lines allow for the installation of a hydro handbrake in the Mazda MX-5. One line runs from the bias proportioning valve or ABS pump to the master cylinder inlet, the other runs from the master cylinder outlet to the rear brake distribution block.


  • Compatible with non-ABS and ABS cars
  • Uses common master cylinder fittings
  • Brake master / ABS pump cylinder outlet fitting: M10x1 bolt & 10mm banjo
  • Hydraulic handbrake master cylinder inlet fitting: 7/16″-20 UNF bolt & 11mm banjo
  • Hydraulic handbrake master cylinder outlet Fitting: 3/8″-24 UNF bolt & 10mm banjo
  • Brake distribution block inlet fitting: M10x1 male swivel fitting

Additional information

Shipping Weight 0.48 kg
Shipping Dimensions 25 × 25 × 3 cm

Hel Performance


Mk1 (89-98), Mk2 (98-05)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.

Make Model Year
Mazda MX-5 I (NA) 1989 - 1998
Mazda MX-5 II (NB) 1998 - 2005