SPS Motorsport Front Air Duct for Mazda MX-5 NA

£199.00 inc. VAT

Insufficient stock

SPS Motorsport Front Air Duct for Mazda MX-5 NA

SPS’s air ducts are designed to maximise cooling capacity by funnelling all the available airflow into the radiator and intercooler. These have been thoroughly designed and tested by SPS Motorsport, from initial 3D scanning to final prototyping, these ducts have been designed from the ground up with performance in mind.

Injection Moulded using ABS plastic, the 2 piece air ducts can be easily adapted to your cars current setup. The lower piece replaces the original air dam and uses the factory mounting points to bolt in. The upper part curves upwards to seal against the top of the radiator to maximise the cooling surface area.

In testing, SPS found this reduced water temperature by up to 25 ° C and intake air temperature (for turbo and supercharger applications) by up to 15 ° C. The Duct has been extensively tested in both road and motorsport applications and has been through several iterations in order to reach its current design.

Cutouts for intercooler piping can be created by simply popping out the pre-cut areas and routing your piping through these. For naturally aspirated applications, these can be left in to maximise airflow or can be turned into brake cooling ducts by plumbing piping towards your discs.

Additional information

Shipping Weight 2 kg
Shipping Dimensions 90 × 40 × 20 cm

SPS Motorsport


Mk1 (89-98)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.

Make Model Year
Mazda MX-5 I (NA) 1989 - 1998

Frequently bought together