BOFI Racing 2.5″ 5 ply Silicone Intercooler Piping for Mazda MX-5 NA NB
We’ve looked at the modifications we’ve done ourselves over the years and have built a one-size-fits-all system that incorporates provisions for IDLE, BOV, IAT and a MAP line for the Turbo Wastegate, which we’ve tested to give a far more linear throttle and removes most of the rubber banding present in some turbo builds.
And finally, the entire pipe run is 2.5” internal diameter, with 6mm wall thickness silicone hose – we have run these at over 21psi of boost without issue. All the angles of the mould have been checked to ensure consistent diameter throughout the bends.
This kit is just the intercooler piping, aluminium joiners and hose clamps. Add the correct outlet pipe for your application below.
Features
- 5ply reinforced silicone pipe
- Specifically designed for the Mazda MX-5 NA & NB
- Includes joiners, T pipe and hose clamps
We recommend using our turbo lower radiator hose in conjunction with intercooler kits as the stock hose routing will foul the piping. https://bofiracing.co.uk/servicing/cooling-heating/coolant-hoses/silicone-one-piece-lower-radiator-hose-for-mazda-mx-5-na-nb/