Permatex High Temperature Thread Sealant 50ml

£18.95 inc. VAT

OEM Spec, high-performance thread locker.

Available to order — usually ships in under 3 weeks

OEM specified. Locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels. Lubricates threads for easy assembly and disassembly. Won’t shred or wear like Teflon tape. Parts may be repositioned up to 4 hours after application. Temperature range -54?C to 204?C. Contains PTFE.

Suggested Applications: Head bolts into through holes, oil PSI sending units and sensors, oil and coolant lines, fuel fittings, rear axle fill plug, brake, and power steering fittings.

Features:

  • Temperature range: -54?C to 204?C
  • Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type I, Grade K)
  • Locks against vibration loosening, safe for locking studs, bushings and fasteners
  • Seals Threads against fluids
  • Replaces set screws and snap rings
  • Very High-temperature resistant

Directions for Use:

  1. For best results, clean parts with Permatex? Surface Prep? activator
  2. Knead tube of Thread Sealant before use
  3. Apply sealant to leading threads of the male fitting, leaving the first thread free of sealant. Apply to only a small amount of a thread turn. It is not necessary to apply to all threads
  4. Assemble parts and tighten to recommended torque

NOTE: Permatex Thread Sealant seals threaded metal fittings on hydraulic, pneumatic, fuel, and cooling systems. It is not recommended for plastics or rubber.

Additional information

Shipping Weight 0.07 kg
Shipping Dimensions 10 × 12 × 5 cm
Brand

Permatex

Size

50ml

Model

Mk1 (89-98), Mk2 (98-05), Mk3 (05-15), Mk4 (15-24)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.