Maruha Bush Puller for Mazda MX-5 NA NB

£40.00 inc. VAT

2 in stock

The Maruha bush puller is a special service tool designed to make removing bushes easy without removing the rear axle or the requirement for a special jig. This bush puller has been designed to remove the bush from the rear knuckle whilst still in situ.

Removing the bush

  1. To remove the bush on the rear knuckle, first, remove the bolt from the upper arm
  2. Place the bush puller on the end of the knuckle and thread the bolt through the centre of the bush
  3. Slowly tighten the nut to pull out the bush. Work slowly to prevent the bolt from being damaged.
  4. Once the bush has been removed, installation is the opposite of removal.

Maruha Bush Puller Procedure

Additional information

Shipping Weight 0.5 kg
Shipping Dimensions 15 × 14 × 7 cm
Brand

Maruha

Model

Mk1 (89-98), Mk2 (98-05)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.