Stant 82°C Integrated Thermostat Housing for Mazda MX-5 NC

From: £40.62

Stant 82°C Integrated Thermostat Housing for Mazda MX-5 NC

Stants OEM replacement integrated thermostat is a direct fit replacement to the OEM unit. The Mazda MX-5 NC came with two types of thermostat housing, a longer one and a shorter one. You’ll need to match your VIN to the table below to find the correct one

Years VIN Type
2005-2008 NC1 Up to 115784 Long
2005-2008 NC1 115785 -> 124658 Short
2008-2015 NC2, NC3 124659 Onwards Long

Tech Specs Long

Temperature (C) 82 Degrees
Check Valve Yes
Jiggle Pin No
Number of Bolt Holes 3
Number of Seals 1
Outlet Inside Diameter 1 (IN) 1.1
Outlet Outside Diameter 1 (IN) 1.37
Supplier Stant
Type Integrated Housing Thermostat

Tech Specs Short

Temperature (C) 82 Degrees
Check Valve Yes
Jiggle Pin No
Number of Bolt Holes 3
Number of Seals 1
Outlet Inside Diameter 1 (IN) 1.11
Outlet Outside Diameter 1 (IN) 1.39
Supplier Stant
Type Integrated Housing Thermostat

Additional information

Shipping Weight 0.28 kg
Shipping Dimensions 20 × 15 × 10 cm
Brand

Stant

Length

Long, Short

Model

Mk3 (05-15)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.