If you’re looking to measure the overall EGT (Exhaust Gas Temperature) of your setup via the downpipe or even individual runners, don’t bother using the cheap and cheerful alternatives from eBay or Amazon. These can be fairly accurate but without a benchmark, you could be as much as 200c out from where you should be – this is from our own testing.
Individual EGT monitoring is great as it allows you to trim the fuels to achieve a burn as close as even as possible, it also allows you to detect an injector failure before the piston melts and can help detect misfires.
Specification
Accuracy: +/- 0.75%
Sheath Diameter (mm): 3 mm
Sheath Length (mm) L1: 75 mm
Sheath Material: Inconel
Cable Length (cm) L2: 100 cm
Cable Material: Glass Fibre Metal Braid
Connector Fitted: Yes
Connector Type: Type K Thermocouple
Special Code: None
Sensor Type:: ‘K isolated junction
Measurement Range: -100C to +1100C (-212F to +2012F)
Manufacturing Location: United Kingdom
Despatch: 1 – 2 Days
Supplied with the associated compression fitting in 1/8 NPT.
Warranty information
Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.
Making a warranty claim
Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.
