Honeywell Oil Pressure Sensor 150psi 5v 1/8 NPT

£104.38 inc. VAT

Out of stock

Get an accurate reading of what going on in your engine with this Honeywell Oil Pressure Sensor. It is ideal for cars that see track use to monitor oil starvation during hard cornering and braking. The 5V output works with Working up to 100PSI and withstanding temperatures of 125?C, this sensor will read pressure in the harshest of conditions. The Honeywell Oil Pressure Sensor is calibrated to be accurate ?1.0 % at 85?C and ?2.0% at 125?C.

Supplied with an automotive weatherproof connector and terminals. The 1/8 NPT thread makes it easy to use with sandwich plates.

Features

  • Pressure range: 1 bar to 50 bar | 15 psi to 700 psi (absolute and sealed gage)
  • Ratiometric output: 0.5 Vdc to 4.5 Vdc or 0.33 Vdc to 2.97 Vdc
  • 4 mA to 20 mA output supports the transmission of output signals over longer distances
  • Calibrated and temperature compensated
  • Total Error Band: ?1.0 %FSS from -20?C to 85?C [-4?F to 185?F]
  • External freeze/thaw resistance: 6 cycles from -30?C to 50?C [-22?F to 122?F]
  • Insulation resistance: >100 MOhm, 1500 Vdc (in dry, non-ionized air)
  • Dielectric strength: AC1500V, 1 min. or AC1800V, 1 s (in dry, non-ionized air)
  • Current consumption: 3.5 mA max.
  • EMC (radiated immunity): 200 V/m (ratiometric voltage output), 140 V/m (current output) per ISO 11452-2
  • Ingress protection IP67 Metri-Pak connector
  • RoHS, REACH, and CE compliant
  • Six industry-standard pressure port types, including a tube port
  • 1/8 NPT thread

ECU Calibration for Oil Pressure Sensor

This sensor operates with a linear output.

0.5v = 0 PSI

4.5v = 150 PSI

Additional information

Shipping Weight 0.04 kg
Shipping Dimensions 8 × 3 × 3 cm
Brand

Honeywell

Engine

1.6, 1.8, 2.0

Model

Mk1 (89-98), Mk2 (98-05), Mk3 (05-15), Mk4 (15-24)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.