Maruha’s long-stroke rear top mount increases the stroke of your rear suspension strut on lowered cars. When lowering a car, you bring the top mount closer to the bottom of the strut, decreasing your effective stroke. By using an extended top mount, the top of your strut is raised, but the rest of the car remains low.
Please note that this part is developed for lowered cars, and is not compatible with standard-height cars. It is designed for dampers and lowering springs or coilovers that retain the standard top mount.
Fits
Mk1 1989-1998 using Mk2 dampers with lowering springs or coilovers that retain the standard top mount
Mk2 1998-2005 using lowering springs or coilovers that retain the standard top mount
Features
- 20mm increased stroke
- Pressed steel for the lightest design
- Uses Mazdaspeed uprated bushes
Kit Includes
- Maruha Long Stroke Rear Top Mount x 2
- Mazdaspeed Upper Bush x 2
- Mazdaspeed Lower Bush x 2
In the above illustration, the first picture is a standard suspension set-up.
The second is a strut on a lowered car, with the top mount also lower
The 3rd is a lowered car with an extended top mount
Warranty information
Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.
Making a warranty claim
Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.
