Cybul Rear Upper Control Arms for Mazda MX-5 NC

£239.38 inc. VAT

Available to order — usually ships in under 3 weeks

The Cybul rear upper control arms are engineered to allow the camber and toe to be easily adjusted across a large range. An adjustable rod end allows the alignment to be fine-tuned whilst also reducing the amount of tension in the suspension under compression and droop. The upper control arms are equipped with rubber covers to protect the rod end against water and dirt ingress, extending the life of the joint.

Installing just a pair of rear adjustable control arms is not enough to set the right geometry. Shortening/lengthening just one arm will create a lot of stress in the suspension. It will also change camber with toe-in/out simultaneously. It is advised to install at least 3 pairs of adjustable control arms ? 2 uppers and 1 lower or 1 upper and 2 lower.


  • Made of thin-walled, ultra-light 4130 chromium-molybdenum tubes
  • Motorsport rod ends are used for longevity ? 3-piece, preloaded, PTFE lined with 4130 chromoly body
  • Equipped with rubber rod end covers for water and dust protection
  • 100% bolt-on solution
  • 3D cad designed
  • 100% made in the EU
  • Comes preassembled with a predefined stock length
Kit Contents
  • 2 (pair) 4130 control arms
  • 4 rod ends
  • 4 rubber dust covers
  • 2 (pair) chromium-molybdenum, heat-treated knuckle inserts
  • 2 (pair) chromium-molybdenum, heat-treated misalignment sleeves
  • 6061 T6, ultra-light aluminium spacer sleeves
  • Locking half nuts

Additional information

Shipping Weight 5.87 kg
Shipping Dimensions 33 × 47 × 12 cm



Mk3 (05-15)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.

Make Model Year
Mazda MX-5 III (NC)