Pedders Ezifit Lowered Rear Coilover for Mazda MX-5 NA

£107.71 inc. VAT

Available to order — usually ships in about 3 days

These Pedders OEDR Ezifit replacement strut is designed for those seeking to replace defective stock suspension and lower the ride height at the same time. These come fully assembled with new top mounts, bump stops and boots ready to fit. Pedders are one of Australia’s biggest suspension manufacturers and have developed their suspension components to withstand the rugged and unforgiving outback. As well as creating high-quality components for direct factory replacements Pedders also have the motorsport knowledge to create high-performance adjustable coilovers.

Rather than replace a pair of shocks or springs, having to strip the struts down to do so, and, inevitably running the risk that further parts such as top mounts and bump stops etc need replacing, you can just purchase these fully assembled coilovers that come with everything new and pre-assembled. Just unbolt the existing strut, remove and install the new one.

Pedders lowering springs offer a moderate drop of approximately 30-40mm depending on model year and specification. To estimate your new ride height, measure upwards from the bottom lip the wheel. For 14″ wheels this would measure around 516mm, for 15″ wheels this would measure 528mm and for 16″ wheels this would be 540mm.?

The Ezifit coilovers feature OEM quality damping but are lower than stock to refresh your suspension while slightly lowering the car.


  • Supplied as a single rear Coilover
  • No need for spring compressors
  • Offer a drop of 30-40mm
  • OEM quality damping while lowering the ride height
  • Reduced installation time
  • All backed by Pedders 2 Year / 25,000 mile warranty

Additional information

Shipping Weight 18 kg
Shipping Dimensions 70 × 40 × 20 cm



Mk1 (89-98)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.

Products related to this item