Verus Engineering Brake Cooling Duct Kit for Mazda MX-5 ND

£746.21 inc. VAT

Available to order — ships in under 10 working days

The Verus Engineering Full Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using the OEM fog lights as the inlet to the kit and a well-formed duct on the backing plate directing airflow into the center of the rotor. The inlet of the kit is a beautiful carbon duct that features a constantly decreasing cross-sectional area that promotes and improves flow through the brake cooling kit. The kit comes with everything necessary for an install, including pre-cut hose.

During the design process; we utilized in-house scan data from the ND. This resulted in a product that features a near OEM fit and?finish.

The brake cooling kit was designed for owners looking to reduce brake fade and improve the thermal characteristics of the brakes on the ND Miata.


  • Carbon Fog-Light Ducts
  • Direct Air into the Center of the Rotor
  • Stainless?Backing Plate Adds Even More Airflow into Center of the Rotor
  • OEM Type Install
  • Installs in a Few Hours With Minimal Hand Tools and Know-How
  • Short?Routing to Maximum Cooling Efficiency


  • Backing Plate Including Carbon Duct, Right-Hand
  • Backing Plate Including Carbon Duct, Left-Hand
  • Carbon Fog-Light Duct, Right-Hand
  • Carbon Fog-Light Duct, Left-Hand
  • 2.5″ High-Temp Silicone Hose, Cut to Size (2)
  • Stainless Hose Clamp (2)
  • Zip-Tie (8)


Additional information

Shipping Weight 2 kg
Shipping Dimensions 30 × 30 × 30 cm

Verus Engineering


Mk4 (15-24)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.

Recommended for you