Airlift Performance Air Suspension Management for Mazda MX-5

From: £1,549.98

Airlift Performance Air Suspension Management for Mazda MX-5

Airlift Performance air suspension management provides the flexibility to customise your install to your application. The freedom to place the air tank, compressor and manifold wherever they fit the best means space can be maximised in smaller vehicles.

Airlift Performance management can control the ride height of the car either by adjusting the pressure of each air spring (3P) or using a combination of individual-level sensors and pressure on each strut (3H). 5 height presets can be stored with either system so the ride can be adjusted quickly and on the fly.

The combination of height and pressure sensors available on the 3H system equalises the pressure across axles to prevent radical differences in pressure, whilst maintaining the desired ride height.


  • Airlift performance controller
  • Integrated ECU & manifold
  • Single 444c Viair Black Compressor
  • Advanced electrical wiring harness
  • 4 Gallon Airlift Tank with inline water filter
  • All wiring, fuses & hardware
  • 60ft of 1/4″ air line

Additional information

Shipping Weight 17.2 kg
Shipping Dimensions 76 × 46 × 23 cm

Airlift Performance


3P Pressure Based System, 3H Height & Pressure System


Mk1 (89-98), Mk2 (98-05), Mk3 (05-15), Mk4 (15-24)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.

Make Model Year