GC Fabrications Door Bars For Mazda MX-5 NA NB

£194.63

GC Fabrications Door Bars For Mazda MX-5 NA NB

We can’t shout loudly enough about how much of a difference door bars make. It’s evident the first time you move the car 3 feet or jack up the car – the chassis rigidity improves massively. It’s not quite like adding a roof to the car but its as good as it gets without putting in a full cage.

All your inputs will be so much more direct, the car’s suspension will work better, the creaks and groans of the chassis seem to disappear, and if you already have a bucket seat like the Motamec MRX, you won’t notice that there in the car, as they don’t go higher than the bolsters. They aren’t designed to protect you further in a side-on collision, their purpose is purely to add stiffness to the chassis.

Please note

If you have a GCR Half Cage, the holes are already there for the door bars to bolt onto; you’ll reuse the same bolts that attach the bottom of your GCR roll bar for the GCR door bars. These door bars will bolt directly to your rear firewall if you have a GC2, GC3 or any other half cage that installs between the seatbelt towers.

On NBFL/MK2.5 cars only, the door cards must be modified or replaced with flat door cards for these door bars to fit properly.

Additional information

Shipping Weight 4 kg
Shipping Dimensions 140 × 20 × 16 cm
Brand

GC Fabrications

Roll Bar Type

GCR Pre SN-1500, GCR Post SN-1500, All Others

Country of Origin

GB

Model

Mk1 (89-98), Mk2 (98-05)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.