When clocking a GT2560-GT2871 turbo the wastegates supplied from the factory either need to be modified or replaced entirely. If you’re going to the trouble of replacing the wastegate then you’ll want one that can be tuned for your specific boost application.
We’ve tested a tonne of combinations during our quest to find the best adjustable, tunable, serviceable wastegate actuator that will also survive track abuse and while Forge didn’t have exactly what we needed off the shelf we were able to create something that meets the needs of the Turbo MX5/Miata community.
Compatible with Kraken T2 Manifolds and BOFI Low Mount Manifold.
You will require the Garrett Bracket as sold here: https://bofiracing.co.uk/product/genuine-garrett-universal-wastegate-actuator-bracket-for-t25-t28-turbo/ in order for this to fit, as the stock wastegate bracket is either incompatible or is part of the stock actuator – Note, this bracket is not compatible with the GT2554R.
We’ve specced this out as a twin port with the ability to change it to a single port if required, this is completely compatible with your usual 3 port electronic boost controller / mac valve but gives you far more headroom for the maximum boost you wish to run vs the initial spring you’re using. Boost by gear, boost by tps, valet mode? It’s all possible with a this unit, al the way up to ~20psi on a green spring.
This kit comes with the following:
FORGE Billet Aluminimum Actuator Housing
Bent Arm to Suit GT/GTX Series Turbochargers
Clevice and Nut to mount to the turbo arm
Locking nuts to mount the actuator to the bracket
Green Spring (5-10PSi) Pre-Installed
Pre-Configured to Twin Port
Supplied with parts to turn into a single port.