Fits NA or NB MX5 / Miata
40mm of roll centre correction eliminating bump steer and giving excellent steering and suspension response.
Huge steering angle (up to 65 degrees when fitted in conjunction with rack spacers) – Even more angle and less ackerman than our modified knuckles. Several backwards entries pulled off with our test drivers.
While these are a direct bolt on part for a standard MX5/Miata, it is very likely you’ll need our lower arms to allow room for the wheel to turn through its full range of motion.
Same weight as standard knuckles.
Uses your standard ball joints, rod ends and bearings.
No ABS mounting point – why would you want it on a drift car?
No dust plate mounting points.
Use only quality wheel bearings. Cheap bearings are cheap for a reason.
These will lower the car by 40mm IN ADDITION to the coilovers so make sure you have suitable engagement of coilover into lower cup.
NOT FOR ROAD USE