Radium DMR-RA Fuel Pressure Regulator

From: Original price was: £153.31.Current price is: £135.48. inc. VAT

Radium Fuel Pressure Gauge 0-100psi

Radium DMR Fuel Pressure Regulator Remote Adapter Kit

Required when not using a Radium fuel rail, or space is limited

Radium 8AN ORB to 8.5mm Barb

Required when remote mounting and using standard fuel lines

Radium 6AN ORB to 8.5mm Barb

Required when using standard fuel lines

Radium DMR-RA Fuel Pressure Regulator

The Radium DMR-RA (Direct Mount Regulator-Rotating ASsembly) fuel pressure regulator is a compact, high-performance regulator designed to be either directly mounted to a Radium fuel rail or remotely away from any other aftermarket or OEM fuel rail. The compact size means the Radium regulator fits into areas with limited space, yet does not sacrifice performance. This regulator is safe for pump fuel, E85 and other alternative fuels.

Fuel pressure is adjusted via the innovative tool-less knob on top of the regulator, eliminating the traditional set screw and jam nut. Incremental detents provide 1 PSI (+/-0.5psi) of adjustment depending on current fuel pressure. The vacuum reference port can be rotated through 360 degrees thanks to its double-o ring seal. The vacuum port can point in any direction without the use of any tools.

Please note the image of the regulator attached to the rail is for illustration purposes only. Different manifolds may not have enough room to install the regulator directly onto the rail. However, the Remote Adapter Kit is available if your particular setup does not permit the regulator to be used in this way.

Features

  • Tool-less fuel pressure adjustment
  • 360-degree rotation of the vacuum port
  • Minimum Pressure: 18.5psi (1.3bar)
  • Maximum Pressure: *N/A

*This is rhetorical. The maximum pressure is dependent on the relief valve inside the pump or the maximum current the fuel pump controller allows.

Kit Contents
  • Main Rotating Assembly
  • 5mm Barbed Vacuum Fitting
  • Vacuum Plug Fitting (Returnless)
  • 1/4″ Push-To-Connect Vacuum Fitting
  • 3AN Male Vacuum Fitting
  • 6AN Male Swivel (for Return Line)
  • Swiveling Inlet Fitting (for 8AN ORB Fuel Rail)
  • PTFE Impregnated 1/8″ NPT Plugs (x2)

Additional information

Brand

Radium Engineering

Model

Mk1 (89-98), Mk2 (98-05), Mk3 (05-15), Mk4 (15-24)

Radium Fuel Pressure Gauge 0-100psi

Weight 0.025 kg
Dimensions 4 × 4 × 4 cm
Brand

Radium Engineering

Model

Mk1 (89-98), Mk2 (98-05), Mk3 (05-15), Mk4 (15-24)

Radium DMR Fuel Pressure Regulator Remote Adapter Kit

Weight 0.1 kg
Dimensions 5 × 5 × 5 cm
Brand

Radium Engineering

Model

Mk1 (89-98), Mk2 (98-05), Mk3 (05-15), Mk4 (15-24)

Radium 8AN ORB to 8.5mm Barb

Weight 0.1 kg
Dimensions 5 × 5 × 5 cm
Brand

Radium Engineering

Model

Mk1 (89-98), Mk2 (98-05), Mk3 (05-15), Mk4 (15-24)

Radium 6AN ORB to 8.5mm Barb

Weight 0.1 kg
Dimensions 5 × 5 × 5 cm
Brand

Radium Engineering

Model

Mk1 (89-98), Mk2 (98-05), Mk3 (05-15), Mk4 (15-24)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.

Frequently bought together