Innovative Mounts Polyurethane Engine Mounts For Mazda MX-5 NA 1.8

Innovative Mounts Polyurethane Engine Mounts For Mazda MX-5 NA 1.8 - Image 2

Innovative Mounts Polyurethane Engine Mounts For Mazda MX-5 NA 1.8 - Image 3

Innovative Mounts Polyurethane Engine Mounts For Mazda MX-5 NA 1.8 - Image 4

Innovative Mounts Polyurethane Engine Mounts For Mazda MX-5 NA 1.8 - Image 5

Innovative Mounts Polyurethane Engine Mounts For Mazda MX-5 NA 1.8 - Image 6

Innovative Mounts Polyurethane Engine Mounts For Mazda MX-5 NA 1.8

FROM: £219.80

-£68

Adjustable mounts to raise or lower your engine

Bushing

Add to wishlist

Innovative Mounts Polyurethane Engine Mounts For Mazda MX-5 NA 1.8

These Innovative Mounts Replacement Polyurethane Engine Mounts are designed for the 94-97 Mazda MX-5 NA. The three positions of adjustment include the OE position, 9.5mm higher for extra sump clearance or 9.5mm for more bonnet clearance. Perfect whether you’re rallying and need to fit a sump guard or have custom LS coils that don’t quite clear the bonnet.

Cars that are subject to performance driving and/or high horsepower experience an increased rate of wear, with rubber mounts quickly going soft. Left unchecked, the rubber mounts can crack and split, leaving the engine secured in place by gravity alone. In the most extreme conditions the metal plates that the rubber is bonded to can distort, upsetting the alignment of the engine with the rest of the drivetrain.

The Innovative Mounts Polyurethane Engine Mounts are a quality replacement that ensures the engine is held firmly in place and will not fatigue over time. The cotton-reel style mount offers the best in both performance and vibration isolation. Supplied with a choice of bushes that are suitable for a range of power levels, from standard cars to 500+bhp monsters. Importantly, Innovative Mounts are stress analysed to ensure they perform under the most demanding of conditions.

Replacement Mount Kit for the 1994-1997 Mazda MX-5 Miata (NA/1.8L)

Designed to fit the Mazda NA chassis on the 94-97 MX-5.

Fits any NA/NB chassis with the 94-97 MX-5 1.8L motor

Features

– Direct Factory/OEM Replacement Kit

– Uses Stock/OEM Hardware

– Unique No-Tear Vibration Minimizing Bushings

– No Notching or Trimming of the Hood Required

– Bolt-On

– CAD/CAM Designed

– Stress Analyzed

– Lifetime Warranty

Specification

RED / 60A (Up to 250bhp)

BLACK / 75A (250-400bhp)

GREY / 85A (400-500bhp)

RED / 95A (500bhp+)

NOTE:

It is strongly recommended that all installs be done by a mechanic or automotive specialist.

Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).

PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.

This kit includes 2 mounts; LH & RH side mounts.

Innovative Engine Mounts are built for performance driving. Although Innovative’s bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine’s series and HP.

Additional information

Shipping Weight	5.03 kg
Shipping Dimensions	32 × 32 × 17 cm
Brand	Innovative Mounts
Engine	1.8
Bushing	60A (Up to 250bhp), 75A (250-400bhp), 85A (400-500bhp), 95A (500bhp+)
Application	Engine Mount
Model	Mk1 (89-98)

Warranty information

Warranties cover defects in materials and workmanship only. Warranty is for replacement of a similar product, repair of the original product or refund of the purchase value only and excludes all labour and incurred charges including towing, fitting, inconvenience, and purchases of other manufacturer's products. The warranty is good for the period stated in the additional info tab from the date of purchase. Mileage warranties are for road use only and proof of mileage is required. Products must be installed by an independent experienced professional mechanic and the suspected defect must be present at the outset. The warranty does not cover damage caused by incorrect installation, failure to comply with the maintenance requirements of the vehicle, processing or otherwise changing the product, ordinary wear and tear, or any other external influences. Warranties are invalid if the product is used for racing, rallying, drifting, track days or any other form of motorsport or competition. Please refer to the manufacturer's own warranty documentation for more information.

Making a warranty claim

Proof of purchase receipt showing the date of purchase, proof of mileage at installation, proof of current mileage and invoice of the work undertaken by an independent experienced professional mechanic must be supplied along with the returned products for a warranty claim to be considered. If your vehicle needs to be used whilst your warranty claim is considered replacement parts from the same manufacturer should be purchased through BOFI Racing. In the event of a successful warranty claim, we will refund the card that was originally used to purchase the replacement parts, in full or in part depending on the nature of the claim. BOFI Racing reserves the right to make full or partial compensation at its sole discretion depending on the condition and mileage use of the returned suspect parts. For example, if you have used the part for several thousand miles before a defect is noticed, only partial compensation may be offered.