HeatShield Products Lava Exhaust Wrap Original

£28.08£54.66

Clear selection
4 users have this item in wishlist
Compare

The original heat wrap made from basalt fibre (crushed volcanic rock), our Lava Exhaust Wrap™ has all the same benefits as header heat wrap, but with a carbon-fibre appearance and improved durability. The Lava exhaust wrap is 25% stronger than fiberglass wraps, giving it prolonged life.

The Original wrap comes in the following sizes

  • 1″ x 25′ (2.54cm x 7.6m)
  • 1″ x 50′ (2.54cm x 15.2m)
  • 2″ x 50′ (5cm x 15.2m)

Using Lava Wrap™ on a header and exhaust system maintains hotter exhaust gases, decreases gas density and allows the exhaust gases to flow through the system at increased velocities. Greater exhaust scavenging is produced, pulling intake gases through the cycle faster, helping to lower air-intake temperatures. This results in more horsepower and reduces radiant heat damage. Lava Wrap™ lowers underhood temperatures by as much as 50%.

The Heatshield Products Lava exhaust insulating wrap withstands continuous temperatures of 649°C and intermittent 1093°C. Please note this is a real-world-tested rating, so beware of inflated temperature ratings of similar basalt/volcanic rock products rated at 1800°F or higher. Basalt (the volcanic rock mineral) is molten (liquid) at sustained temperatures of 982°C. Make sure you are getting the original volcanic rock wrap with the honest temperature rating. Installation is easy: Wrap it around your exhaust pipe, using overlap to hold it in place (like a hockey stick or tennis racket grip) and use our Thermal-Tie™, HP Tie Wire™, or hose clamps to secure the ends in place.

Lava_Exhaust_2ft_25_Temperature

Our range of Heatshield Products  Lava Turbo Heat Shield™ are available for next day delivery across the UK, subject to stock.

Weight 0.440 kg
Dimensions 20.5 × 13 × 6.5 cm
Brand

Heatshield Products

Size

1" x 25", 1" x 50", 2" x 50"

Reviews

There are no reviews yet.

Be the first to review “HeatShield Products Lava Exhaust Wrap Original”
You have to agree to the comment policy.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Make Model Year

We Can Install This For You

Alongside part sales, we also operate a workshop service to install and configure all the products we offer online.

For the past decade, we’ve been servicing, modifying and boosting our own MX-5s. What started as three guys in a shed has grown into a workshop full to the brim of MX-5 knowledge and passion, where no project is too big or service job too small.

If you’d like to book something in or have a chat about your build, give us a call on +44 (0) 203 795 0515 or send us an email at [email protected]