Energy Suspension Complete Poly Bushes Kit for Mazda MX-5 ND
Rubber softens over time, reducing its ability to hold your suspension components firmly in place. This means that when your wheels hits the road, the once meticulously aligned suspension is able to flex, moving your geometry along with it. By replacing your tired rubber bushes with uprated polyurethane, your suspension keeps its alignment better, making your car handle more positively and predictably.
Moreover, the design of these bushings is more akin to a bearing, allowing the arm to move freely up and down while being solidly located within the arm. This allows the suspension to do its job rather than the control arm bush acting as a damper in motion. Highly recommended by BOFI Racing to ensure predictable, repeatable handling characteristics, giving you an even better feel in the hand than when the car was new.
What’s in the box?
Front Control Arm Bushing Set
- 4 X 03P03596 – Front Upper Control Arm Bushing – Outer Position
- 4 X 03P03597 – Front Upper Control Arm Bushing – Inner Position
- 4 X 15.10.324.39 – Metal Sleeve (.875″ x .500 x 2.140)
- 2 X 03P03598 – Front Lower Control Arm Bushing – Front Position – Front
- 2 X 03P03599 – Front Lower Control Arm Bushing – Front Position – Rear
- 2 X 15P1069739 – Metal Sleeve (1.125″ x .563 x 2.360)
- 4 X 03P03600 – Front Lower Control Arm Bushing – Rear Position
- 2 X 15P1071439 – Metal Sleeve (1.125″ x .563 x 2.250)
Rear Control Arm Bushing Set
- 4 X 07P07157 – Rear Toe Control Link
- 2 X 15.10.17.39 – Metal Sleeve (.875″ x .625 x 1.960)
- 4 X 15.03.99.39 – Cap Washer (1.295″ x .500 x .225)
- 4 X 07P07158 – Rear Lateral Link # 2
- 2 X 15.10.17.39 – Metal Sleeve (.875″ x .625 x 1.960)
- 4 X 15.03.99.39 – Cap Washer (1.295″ x .500 x .225)
- 4 X 07P07159 – Rear Lateral Link # 3
- 2 X 15.10.324.39 – Metal Sleeve (.875″ x .500 x 2.140)
- 4 X 07P07160 – Rear Lateral Link # 1
- 2 X 15.10.324.39 – Metal Sleeve (.875″ x .500 x 2.140)
- 4 X 07P07161 – Rear Lateral Link
- 2 X 15.10.497.39 – Metal Sleeve (.875″ x .500 x 1.880)
- 2 X 07P07162 – Rear Trailing Link At Knuckle
- 2 X 15.10.497.39 – Metal Sleeve (.875″ x .500 x 1.880)
- 2 X 07P07163 – Lateral Link # 3 at Knuckle
- 2 X 15.10.497.39 – Metal Sleeve (.875″ x .500 x 1.880)
- 2 X 07P07164 – Lateral Link # 2 at Knuckle
- 2 X 15.10.335.39 – Metal Sleeve (.875″ x .500 x 1.943)
Front Sway Bar Bushing Set
- 2 X 05P06042 – Sway Bar Bushing – 22mm (0.866 inch)
- 2 X 15P0813442 – Shaft Collar -7/8″ I.D.
- 1 X 17P17679 – Installation Instructions
Rear Sway Bar Bushing Set
- 2 X 05P06004 – Sway Bar Bushing – 11mm (0.433 inch)
- 2 X 15P0813542 – Shaft Collar -7/16″ I.D.
- 1 X 17P17679 – Installation Instructions
Rear Differential Bushing Set
- 2 X 01P01352 – Differential Bushing
- 2 X 15.10.560.39 – Metal Sleeve (1.000″ x .438 x 1.950)
- Installation Instructions