Introducing the AVO Turbo Kit for your 2016+ ND MX5
The Stage 1 kit that has been tested to 247BHP / 210ftlbs of torque – a considerable increase at a very low boost pressure of only 5-6 psi resulting in near zero lag with a very linear power curve.
-Provides 40% power increase over stock
-No modifications needed for install
-Comes with AVO Power + Plug and Play Reflash Tool
-Top quality product from AVO Turbo World
-Comes with OEM Style BOV
-Comes with Panel Filter
-Compatible with i-Eloop equipped vehicles
-Only available for 2.0L ND MX-5 (2016+)STAGE1 KIT INCLUDES
AVO 18/49 Turbocharger with Ceramic Coating
AVO Stainless Steel Cast Exhaust Manifold with Ceramic Coating
AVO Water and Oil Hosing & Fittings.
AVO Stainless Steel Front pipe with Ceramic Coating
AVO Bar & Plate Front Mount Intercooler with Reinforced Silicone Hosing & Powdercoated Steel Piping
AVO OEM BOV Kit
AVO Air Box Top Lid with AVO Drop-In Air Filter
AVO Power + Plug and Play Reflash Tool (Includes stock MAP, Valet & 4 MAPS) (or EcuTek)INSTALLATION
Under normal conditions this kit can be installed in 7-8 hours from start to finish. This job is much easier to perform using a lift and proper tools. One of the hardest portions of this install is removing the stock header. You’re required to remove the engine mounts which will make installing the turbo kit much easier. Any installation shop will need the ability to weld the turbocharger oil drain fitting (return line) into the oil pan. The only modification to any OEM part is to the plastic under tray beneath the engine. It needs two 2.5” holes to be cut with a box knife or cutting tool. This will allow proper fitment of the silicone intercooler pipes. Other than that, the installation is straight forward for most independent technicians or DIY’s.